lft-g ブランド PLA コンパウンド充填長炭素繊維 20%-60% 高性能低反りナチュラルカラー

What is carbon fiber PLA?

Carbon fiber reinforced PLA is an excellent material, strong, lightweight, with excellent layer bonding and low warpage. It has excellent layer adhesion and low warpage. Carbon fiber filaments are not as strong" as other 3D materials, but are much stiffer. The increased rigidity of carbon fiber means increased structural support, but reduced overall flexibility. It is slightly more brittle than regular PLA. 




Carbon PLA Specifications

Flexural strength: 57 MPa
Melting temperature: 190°C- 230°C
Tensile strength: 45.5 MPa .
Elongation at break: (73°F) 320%
Standard tolerance: 0.05mm
Layer thickness: 3mm
Shore hardness: 45D
Density: 1.3 g/cm3 (1300 kg/m3)
Heat distortion: 21% to 85°C
Shrinkage: very low when cooled to higher ambient temperatures

Characteristics

Moderate strain at break (8-10%), so the filaments are not very brittle, but very tough
Very high melt strength and viscosity
Good dimensional accuracy and stability
Easy handling on many platforms
Highly attractive matte black surface
Excellent impact resistance and lightness

Applications of carbon fiber PL A material

Carbon PLA is the ideal material for frames, supports, housings, propellers, chemical instruments, etc.

It is also particularly preferred by drone manufacturers and RC enthusiasts. Ideal for applications requiring maximum stiffness and strength.

Other products you may wonder

                PA6-LCF                                    PP-LCF                                   PEEK-LCF

About Long carbon fiber

Long carbon fiber reinforced composites offer siginifacant weight savings and provide optimum strength and stiffness properties in reinforced thermoplastics. The excellent machanical properties of long carbon fiber reinforced composites make it an ideal replacement for metals. Combined with the design and manufacturing advantages of injection molded thermoplastics, long carbon fiber composites simplify the re-imagining of components and equipment with demanding performance requirements. Its widespread use in aerospace and other advanced industries makes it a "high-tech" perception of consumers - you can use it to market products and create differentiation from competitors.

About us

アモイ LFT 複合プラスチック有限公司は、LFT&LFRT に焦点を当てたブランド企業です。長ガラス繊維シリーズ (LGF) および長炭素繊維シリーズ (LCF)。同社の熱可塑性 LFT は、LFT-G 射出成形および押出成形に使用できるほか、LFT-D 成形にも使用できます。お客様のご要望に応じて長さ5～25mmまで製作可能です。同社の連続浸透強化熱可塑性プラスチックは ISO9001&16949 システム認証に合格しており、製品は多くの国内商標と特許を取得しています。

私たちはあなたに以下を提供できます：

1. LFT & LFRT 材料技術パラメータと最先端の設計。

2. 金型前面の設計と推奨事項。

3. 射出成形、押出成形などの技術サポートを提供します。