PEEK-ロングカーボンファイバー ポリエーテルエーテルケトン（PEEK）は、ポリエーテルエーテルケトンの完全な英語名であり、優れた性能を備えた特殊エンジニアリングプラスチックであり、耐摩耗性、高温耐性、高強度および高弾性率、難燃性、放射線照射など、他の特殊エンジニアリングプラスチックに比べて多くの利点を備えています。耐性など。さらに、ポリエーテルエーテルケトン (PEEK) は優れた熱安定性と融点以上でのメルトフローを備えているため、熱可塑性プラスチックの典型的な加工特性も備えています。 PEEK樹脂は無毒で軽量、耐食性があり、人体の骨格に最も近い素材の一つで筋肉組織との親和性が高いため、金属の代わりに人骨を作るのによく使われます。炭素繊維強化 PEEK 複合材料は、靭性の弱点と衝撃強度のばらつきを補います。炭素繊維強化 PEEK 複合材料は、熱水、蒸気、溶剤、化学試薬などの条件下で高い機械的強度と加水分解安定性を示すことができ、高温蒸気滅菌を必要とするさまざまな医療機器の製造に使用できます。 PEEK-LCFの利点 PEEK は、高い剛性、良好な寸法安定性、低い線膨張係数を備えており、長期間にわたって大きな伸びを生じることなく大きな応力に耐えることができます。また、その低密度と良好な加工特性により、緻密性の要求が高い部品に適しています。これらの要素の中で、炭素繊維材料は PEEK の特性と重なり合います。カーボンファイバーは代表的な軽量素材であるだけでなく、機械的特性にも優れています。その結果、炭素繊維強化 PEEK 複合材料は、従来の金属材料と比較して重量を少なくとも 70% 削減できます。 PEEK 材料自体は非常に耐摩耗性があり、炭素繊維との良好な界面結合により耐摩耗性がさらに向上します。炭素繊維強化 PEEK 複合部品とコバルト合金材料を使用した摩耗比較実験の結果は、次のことを示しています。 M-200 摩耗機を 400 rpm で 100 分間摩耗させたところ、炭素繊維強化 PEEK 複合材の表面が滑らかであることがわかりました。摩耗痕は小さく、炭素繊維は繊維が抽出されることなく PEEK とよく結合しました。対照的に、コバルト合金表面の摩耗痕跡は非常に明白で、多数の摩耗粒子が現れ、金属の内部不純物が目に見えます。 PEEK は、熱水、蒸気、溶剤、化学試薬などにおいて高い機械的強度と加水分解安定性を示します。 参考用のデータシート PEEK-LCF アプリケーション Q&A 1. 熱可塑性炭素繊維複合材料にはどのような種類がありますか? 炭素繊維熱可塑性複合材は、強化材として炭素繊維、マトリックスとして熱可塑性樹脂を含む複合材です。炭素繊維の強化方法から、ロングカット炭素繊維（LCF）強化熱可塑性複合材、ショートカット炭素繊維（SCF）強化熱可塑性複合材、連続炭素繊維（CCF）強化熱可塑性複合材に分けることができます。 ロングカットカーボンファイバーとショートカットカーボンファイバーは主にカーボンファイバー材料の適用長さを指します。両者の間に厳密な固定的な区別はありません。一般に数ミリメートルから数センチメートルの間であり、より一般的な仕様は6mm、12mmです。 、20mm、30mm、50mm。 炭素繊維熱可塑性複合材料は、熱可塑性樹脂に従って分類することもできます。PE、PP、PVC など、一般的な熱可塑性樹脂は数多くあります。ただし、炭素繊維強化を含む熱可塑性樹脂複合材料は、航空宇宙、精密機器、その他の要求の厳しい作業環境で主に使用されるため、炭素繊維熱可塑性複合材料がより頻繁に製造されます。ポリエーテルエーテルケトン（PEEK）、PPS、ポリイミド（PI）、ポリエーテルイミド（PAI）などの中高級熱可塑性樹脂をマトリックスとして使用し、材料性能の最適化を実現します。 2. 熱可塑性炭素繊維複合材料はどのようにして低コストと環境保護を実現するのでしょうか? 熱可塑性炭素繊維複合材料は、ハイエンド機械の部品の製造に使用されます。機械加工性、真空成形性、プレス金型塑性性、曲げ加工性に優れています。 例えば、帝人は、特定のニーズに応じてプロセスにリサイクルプロセスを追加し、スタンピング後に熱可塑性炭素繊維複合材料�

ピーク PEEK は一般にポリエーテルエーテルケトンと呼ばれ、半結晶性熱可塑性樹脂のポリエーテルケトン ファミリーの一部です。しかし、PEEK ポリマーのエーテル (E) とケトン (K) の比は 2:1 というユニークな特性により、他のポリエーテルケトンと比較して優れた耐薬品性を実現し、純粋な樹脂として利用できるだけでなく、PEEK がより広範に使用される主な要因となっています。ただし、カーボンファイバーフィルを追加して変更することもできます。その特性 PEEK-LCF 30% の長炭素繊維フィラーを含む PEEK-LCF30% は当社の主力製品であり、LFT-G の PEEK LCF30% は 30% の長炭素繊維強化材を配合して、あらゆる PEEK グレードの中で最高の機械的強度と剛性を実現します。また、PEEK LCF30% は繰り返しのオートクレーブサイクルの影響を受けず、幅広い化学薬品に対して耐性があります。 It also meets FDA requirements for direct food contact applications and meets the aerospace industry's stringent flammability and low smoke requirements with a flame retardancy rating of UL 94 V-0. It has the wear and temperature resistance of PEEK and can withstand long-term exposure to steam, hot water and a wide range of chemicals. In particular, it performs well as a bearing material when operating on hard mating surfaces, and its materials are often used in precision machined parts. It has the highest strength and stiffness of any PEEK grade. Although it contains more reinforcement per unit volume, it is 7% lighter than glass-reinforced grades. It is an excellent choice for high-load machined or molded parts. TDS for your reference Appilcation Details Number Colour Length Sample Package MOQ Delivery time Port of Loading PEEK-NA-LCF30 Natural colour (can be customized) About 12mm (can be customized) Available 20kg/bag 20kg 7-15 days after shipment Xiamen Port Reasons for selection The above general-purpose grade PEEK-LCF is LFT-G's main product, LFT-G can also provide more custom modification services, we have also been committed to custom R & D production of special engineering plastics PEEK, PPS, PP, PA6, PA66, PA12, TPU, ABS, etc. 01 Factory direct sales, with high-tech factory Affordable price and high quality products. 02 Large amount of inventory, hundred tons of stock Adequate stock, quality and quantity assurance, on-time delivery, the company has its own warehouse, a full range of products. 03 Provide perfect supporting services for customers Zhenghao has a perfect pre-sales, sales and after-sales service system; the first time to solve the customer's concerns. Frequently asked questions Q. When using long carbon fiber engineering plastics, what is the solution to the lack of torque an insufficient injection pressure? A. You can change the injection molding machine to a larger size, or increase the molding temperature, increase the injection pressure. Q. The cost of long fiber products is higher. Does it has a high recycling value? A. The thermoplastic LFT long fiber material can be recycled and reused very well. Q. Using a long fiber reinforced thermoplastic material, will it block the die hole due to the long length of the fiber or not? A. ガラス長繊維やカーボン長繊維を使用する場合、LFT-Gに適しているかどうかを評価する必要があります。製品が小さすぎる場合、または塗布が長繊維材料に適していない場合。長繊維自体が金型ノズルに必要な要件を備えています。

PEEK-LCF Polyether ether ketone (abbreviated PEEK) not only has excellent mechanical, heat and chemical resistance properties, and low friction coefficient, good bearing meshing, is another kind of good self-lubricating material after polytetrafluoroethylene (PTFE), in the bearing capacity and wear resistance than PTFE performance is better, In no lubrication, low speed and high load, high temperature, humidity, pollution, corrosion and other harsh environment is especially suitable. On this basis, the addition of carbon fiber not only enhances its mechanical properties, its friction performance has important ‌ influence. At room temperature, the tensile strength of 30% carbon fiber reinforced PEEK composite doubled, and reached three times at 150℃. At the same time, the impact strength, bending strength and modulus of the reinforced composite were also greatly improved, the elongation was sharply reduced, and the thermal deformation temperature could exceed 300℃. The impact energy absorption rate of the composite directly affects the impact performance of the composite. The carbon fiber reinforced PEEK composite shows a specific energy absorption capacity of up to 180kJ/kg. The reinforced effect of carbon fiber can also resist the thermal softening of PEEK and form a transfer film with very high strength to a certain extent, which can effectively protect the contact area. Therefore, the friction coefficient and specific wear rate of carbon fiber reinforced PEEK composite are significantly lower than that of pure PEEK. Under the same experimental conditions, the friction and wear resistance of carbon fiber reinforced PEEK composites is obviously better than that of glass fiber PEEK composites, and the improvement effect of carbon fiber on the wear resistance of materials is more than 5 times that of glass fiber with the same dosage. Carbon fiber reinforced PEEK composite material is used in parts manufacturing, which can effectively avoid the surface cracks of metal or ceramic materials, and its excellent tribological properties even exceed that of ultra-high molar mass polyethylene. TDS Application Long carbon fiber reinforced PEEK is mainly applied in the following four areas: 1. Electronic and electrical appliances PEEK can maintain good electrical insulation in the harsh environment such as high temperature, high pressure and high humidity, and has the characteristics of non-deformation in a wide temperature range, so it is used as an ideal electrical insulation material in the field of electronic and electrical appliances. The mechanical properties, chemical corrosion resistance, radiation resistance and high temperature resistance of polyether ether ketone reinforced by carbon fiber have been further improved, and its application fields have been further expanded. 2. Aerospace Polyether ether ketone PEEK has the advantages of low density and good workability, so it is easy to be directly processed into high-demand parts, and carbon fiber reinforced polyether ether ketone composite material further enhances the overall performance of polyether ether ketone, so it is increasingly used in aircraft manufacturing. The fairing on Boeing's 757-200 series aircraft, for example, is made from carbon-fiber reinforced PEEK. In addition, Gereedschappen Fabrick of Amsterdam, the Netherlands, used a 30% carbon fiber reinforced PEEK composite to build a larger component and demonstrated that its mechanical properties could be used in aircraft balancing devices. 3. Automotive Automobile energy consumption is closely related to vehicle weight. Automobile lightweight can not only reduce fuel consumption and exhaust emissions, but also improve power performance and safety, which is an effective way to save energy. In addition to the lightweight design of the structure, the use of lightweight materials is a more direct method. With its advantages of low density, good performance and convenient technology, carbon fiber reinforced polyether ether ketone composites are more and more frequently used in the automobile industry, and show great potential of replacing steel with plastic. For example, Robert Bosch GmbH uses carbon fiber reinforced PEEK instead of metal as a feature of ABS. The lighter composite part reduces moment of inertia, which minimizes reaction times, greatly enhances the overall system's reactivity, and reduces costs compared to previously used metal parts. 4. Healthcare Currently available medical polymer materials are polytetrafluoroethylene, polylactic acid, silicone rubber and dozens of kinds, but from the point of view of biomedicine, these materials are not ideal, in the use of some side effects, and PEEK resin because of its non-toxic, light weight, abrasion resistance and other advantages, is the material closest to the human skeleton, can be organically combined with the body, Therefore, polyether ether ketone resin and its composite materials have been deeply studied and applied in spine and joint...

What is PEEK? Polyether ether ketone (PEEK) is a semi-crystalline thermoplastic polymer material with rigid benzene ring, compliant ether bond and carbonyl group which can promote the intermolecular force in its molecular chain. PEEK has excellent wear resistance, electrical insulation, anti-radioactivity, chemical stability, biocompatibility and thermal stability. In addition, PEEK is reusable and has a high recovery rate. PEEK is widely used in aerospace, electronic and electrical appliances, biomedicine, Marine protection, automobile industry and other fields. PEEK material is an inert material with low surface free energy, and its mechanical properties and frictional properties cannot meet the needs of some special fields. Therefore, it is necessary to modify PEEK composite material to improve its comprehensive properties. At present, filling modification and blending modification are the main methods for preparing PEEK composite materials. Filler modified reinforcement materials mainly include fiber, inorganic particles and whisker; The polymer used for blending modification should have similar polarity and solubility to PEEK. The interface modification method can improve the interface adhesion and enhance the comprehensive properties of PEEK composites. What is PEEK-LCF? As a filling system, fiber can effectively carry part of the load, and the synergistic action between fiber and PEEK can improve the comprehensive performance of composite materials. Carbon fiber and glass fiber are widely used as filler modified composites because of their high strength, high modulus and high durability. Long carbon fiber (LCF) can be used as heterogeneous nucleating agent to promote the crystallization of PEEK in composite materials, which can effectively improve the mechanical and tribological properties of composite materials. PEEK/CF composites of different lengths were prepared by injection molding, and their infiltrating and tribological properties were studied. The results show that the addition of CF increases the contact Angle and decreases the hydrophilicity of the composites. But the friction coefficient of composites is reduced and the friction resistance is improved. Long carbon fiber (LCF) has better effect on reducing friction coefficient than short carbon fiber (SCF). TDS for reference Application Q&A 1. What are the advantages of long carbon fiber materials? A: Thermoplastic LFT Long carbon fiber material has high rigidity, good impact strength, low warpage, low shrinkage, electrical conductivity and electrostatic propertiea, and its mechanical properties are better than glass fiber series. Long carbon fiber has the characteristics of lighter and more convenient processing to replace metal products. 2. Are there any special process requirements of long carbon fiber injection molding products? A: We must consider the requirements of long carbon fiber for the injection molding machine screw nozzle, mold structure and injection molding process. Long carbon fiber is a relatively high cost material, and need to evaluate the cost performance problem in the selection process. 3. The cost of long fiber products is higher. Does it has a high recycling value? A: 熱可塑性 LFT 長繊維素材はリサイクルして再利用することができます。 私たちはあなたに以下を提供します: 1. LFTおよびLFRT材料の技術パラメータと最先端の設計 2. 金型正面の設計と推奨事項 3. 射出成形、押出成形等の技術サポートの提供

特殊エンジニアリングプラスチックの一種であるPEEKは、優れた総合性能を持っています。

製品グレード：一般グレード 繊維の指定: 30%-60% 製品特徴：難燃性、耐熱性、耐薬品性、低摩擦係数、耐荷重性良好 製品の用途: 航空、機械、電子、化学、自動車、その他のハイテク分野。

軽量車用の長い炭素繊維強化熱可塑性プラスチックのピーク充填 部品

軽量車用の長い炭素繊維強化熱可塑性プラスチックのピーク充填 部品

ピークペレット軽量で強力な射出成形

PEEKペレットpeek樹脂工場peek樹脂の価格長炭素繊維 て 良に を特徴，などの と 軽量で強くなっています。

文字の 工プラスチックpeek黒い顆粒peekペレットで安くよりその他、弊社の製品は官frome。

lucas繊維強化peekペレットの軽量な強化ポリマー