24時間年中無休のオンラインサービス : +86 13950095727

#Eメール
  • シェア :

  • facebook
  • g
  • y
  • t
  • instagram
  • in
検索
ホーム / 検索
  • ABS-NA-LGF30
    LFT-G ABS アクリロニトリル ブタジエン スチレン充填ガラス長繊維高性能工業用
    ABS ABS resin is a thermoplastic polymeric structural material with high strength, good toughness and easy processing and molding. Long glass fiber reinforced ABS granules Long glass fiber reinforced plastic is based on the original pure plastic, adding long glass fiber and other additives, so as to improve the scope of use of the material. Generally speaking, most of the long glass fiber reinforced materials are mostly used in the structural parts of products, which is a structural engineering material, such as PP, ABS, PA66, PA6, PBT, PPS, etc. Advantages After long glass fiber reinforced,  long glass fiber is a high temperature resistant material, therefore, the heat resistance temperature of reinforced plastics is much higher than before without long glass fiber. After long glass fiber reinforced, the addition of long glass fiber restricts the movement of polymer chains between plastics, so the shrinkage of reinforced plastics is much lower and the rigidity is much higher. After long glass fiber reinforcement, the reinforced plastic will not be stress cracked, and the impact resistance of the plastic will be improved. After long glass fiber reinforcement, long glass fiber is a high-strength material, which also greatly improves the strength of plastic, such as: tensile strength, compression strength, bending strength, much higher. After the long glass fiber reinforcement, the burning performance of the reinforced plastic decreases a lot due to the addition of long glass fiber and other additives, and most of the materials cannot be ignited, which is a kind of flame retardant material. Datasheet for reference Application Can be used at many fields. For more details, please contact us. Other products you may wonder                                                                                                                                                                               PP-NA-LGF                              PA6-NA-LGF                           TPU-NA-LGF                     Frequently asked questions Q. What are the differences and advantages of long fiber materials and thermosets and staple fibers? A. Compared with the short fiber, it has more excellent performance in mechanical properties. It is more suitable for large products and structural parts. It has 1-3 times higher toughness than short fiber, and the tensile strength (strength and rigidity) is increased by 0.5-1 times. Compared with thermosets, it is more environmentally friendly. It can be recycled and reused,  and has simple molding efficiency, lower cost etc. But its mechanical properties are worse than thermosets. Q. Using a long fiber reinforced thermoplastic material, will it block the die hole due to the long length of the fiber or not? A. ガラス長繊維やカーボン長繊維を使用する場合、LFT-Gに適しているかどうかを評価する必要があります。製品が小さすぎる場合、または塗布が長繊維材料に適していない場合。長繊維自体が金型ノズルに必要な要件を備えています。 Q. 長繊維強化熱可塑性材料を使用する場合、補強方法と材料の長さはどのように選択すればよいですか? A. 材料の選択は製品の要件によって異なります。製品の要求性能に応じて、内容物をどの程度強化するか、どの程度の長さが適切であるかを判断する必要があります。 アモイLFT複合プラスチック有限公司 ご提供させていただきます 1. LFTおよびLFRT材料の技術パラメータと最先端の設計 2. 金型正面の設計と推奨事項 3. 射出成形、押出成形等の技術サポートの提供
    もっと見る

の合計 1 ページ数

ニュースレター

-- 最新のトピックで最新情報を入手する

著作権 © 2015-2024 Xiamen LFT composite plastic Co.,ltd..すべての権利予約.

ホーム

製品

 ニュース

接触